Automotive Circuit Tester for 12V 24V Vehicle

From the Brand About AUTOOL:

AUTOOL has been deeply engaged in automobile maintenance tools for more than ten years, aiming to provide automobile maintenance personnel with a simpler and more efficient automobile maintenance solution. AUTOOL aims to provide the most effective maintenance and repair solutions for your beloved car. So far, our products have spread to more than 160 countries around the world.

In the future, we will continue to provide more high-quality products and services with the attitude of being responsible for products, users, and customers.

Product Description:

1. DC Voltage:

2. Used to detect the voltage value of the circuit under test.

3. AC Voltage:

4. Used to detect the maximum minimum voltage value, power frequency, and duty cycle of the circuit.

5. Resistance Mode:

6. In this mode, the LCD display will read the resistance between the tip and auxiliary ground lead.

7. Diode Mode:

8. Quickly test the working condition of diode components and determine open circuits and continuity.

Continuity Testing: - In Resistance mode, using the probe with chassis as ground or the auxiliary ground lead, continuity can be tested on wires and components attached or disconnected from the vehicle's electrical system.

Activating Components: - Activating components in your hand, activating components in the vehicle, activating components with ground.

Checking for Poor Ground Contacts: - Probe the suspected ground wire or contact with the probe tip. If the circuit breaker tripped, this circuit is more than likely a good ground.

Following and Locating Short Circuits: - Remove the blown fuse from the fuse box. Use the probe tip to activate and energize each of the fuse contacts. The contact which trips the circuit breaker is the shorted circuit.

Tone Function and Lighting: - Tone function is valuable when working in dark areas and when lighting conditions are limited. - Even in the unclear night or low light conditions, AUTOOL circuit tester can give you a good vision. - It is the best electrical tester tool for diagnosing all 6-30 volt vehicle electrical systems. - The circuit tester supports 7 languages and provides 4.9ft of electrical wire for easy use.

Automotive Power Circuit Probe Tester Series: - BT250: Voltage Range 6-30V, Component Activation, Continuity Test, Circuit Breaker, 0 - 5V Power Supply - BT210: Voltage Range 9-30V, Component Activation, Continuity Test, Circuit Breaker - BT280: Voltage Range 9-30V, Component Activation, Continuity Test, Circuit Breaker, 0 - 5V Power Supply

The BT250 power circuit probe tester can test for voltage and polarity/continuity/signal circuits/bad ground contacts/short and open circuits, and also check the on/off of switches, relays and diodes, fuses and circuits, activating electronic components in your hands/in your vehicle/with a ground. It is the best electrical tester to reduce the diagnostic time of all 6-30 volt vehicle electrical systems.

The circuit tester has 4 adjustable modes: AC, DC, Resistance, and Diode Test. It can also provide an audio tone for working in low-light conditions. The wide voltage range and the ability to power components make it suitable for a variety of vehicles, including cars, boats, trailers, ATVs, and motor homes.

The BT250 automotive circuit tester is built with an inner circuit breaker for user safety and product durability. If overloaded, the circuit breaker will trip and automatically disconnect the protection circuit.

product information: